Bang & Olufsen BeoLab 10 Specifications download pdf (Page 8)

Adapt BeoLab 3 to your room

The POSITION switch

When a loudspeaker is placed in a corner, the bass level is boosted

compared to the bass level from a loudspeaker placed in a more

free-standing position.

To ﬁ lter out this natural bass boost, the loudspeaker has a switch

marked POSITION. The purpose of the switch is to ensure that the

bass level suits the placement of the loudspeaker. The appropriate

switch setting depends on the distance from the loudspeaker to

the walls and corners of the room.

The POSITION switch has three settings:

• FREE

Use this setting if the loudspeaker is

placed more than 30 cm (12") from

the wall, and no closer to a corner

than 65 cm (25") – shown by the

large light grey area in the

illustration on the next page.

• WALL

Use this setting if the loudspeaker is

placed less than 20 cm (8") from a

wall, and no closer to a corner than

65 cm (25") – shown by the grey

areas along the walls in the

illustration on the next page.

The loudspeaker may be placed

almost anywhere in your room.

However, the most natural

sound and best stereo

perspective is obtained if it is

set up as explained on these

pages.

• CORNER

Use this setting if the loudspeaker

is placed in a corner – shown by the

dark grey areas in the illustration on

the next page.

However, we do not recommend

that you place the loudspeaker

closer to the corner than 30 cm

(12") – shown by the black areas in

the illustration on the next page.

POSITION SETUP

WALL

FREE

CORNER

LEFT

RIGHT

LINE

The POSITION switch is located on

the socket panel.

Note: It is important that you set the

SETUP switch to the correct setting

on each of the loud speakers – as

explained on page 6.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Bang & Olufsen BeoLab 10 Specifications Page 8

Comments to this Manuals

Related products and manuals for Soundbar speakers Bang & Olufsen BeoLab 10