Bang & Olufsen BeoLab 10 Specifications download pdf (Page 6)

Cable connections

POSITION switch

This switch has three settings: FREE,

WALL, and CORNER. Which setting to

use is explained in ‘Adapt BeoLab 3

to your room’ (pp. 8–10).

SETUP switch

This switch has three settings:

RIGHT, LEFT, and LINE.

Set the switch to RIGHT or LEFT,

when connecting loudspeakers in a

Bang & Olufsen system. Set the

switch to LINE when connecting

loudspeakers in a non-Bang &

Olufsen system.

POWER LINK and LINE socket

Use this socket to connect the

loudspeaker to your system…

…To a Bang & Olufsen system:

Use the enclosed Power Link cable

to connect the loudspeaker to your

system. Remember to set the SETUP

switch to RIGHT and LEFT (the right

and left sound channel), respectively.

…To a non-Bang & Olufsen

system:

Use a special adapter with an

ordinary phono/RCA plug in one

end, and a DIN-plug in the other

(optional accessory, available from

your Bang & Olufsen retailer).

Remember to set the SETUP switch

to LINE.

The LINE signal must be a volume-

controlled line-level signal not

exceeding 3 V

RMS

The loudspeaker can be used

with Bang & Olufsen audio,

video and link systems. It may

also be used with non-Bang &

Olufsen systems.

Cover for socket panel: Run the

two cables through the hole (A),

before you connect them to the

loudspeaker.

POSITION switch SETUP switch

POWER LINK and

LINE socket

The socket panel is located on the bottom part of the loudspeaker.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Bang & Olufsen BeoLab 10 Specifications Page 6

Comments to this Manuals

Related products and manuals for Soundbar speakers Bang & Olufsen BeoLab 10