Bang & Olufsen BeoLab 10 Specifications download pdf (Page 3)

Daily use

When you have ﬁ nished setting up the loudspeakers as described on

the following pages, connect the entire system to the mains. The

loudspeakers are designed to be left in standby when not in use.

Switching on and off

When you switch on your system,

the loudspeaker switches on

simul taneously, and the indicator

light shines green.

When you switch off your system,

or mute the sound, the indicator

light turns red.

Cleaning

Clean the loudspeaker surfaces

using a soft, lint-free cloth which

you have dipped in lukewarm

water and wrung ﬁ rmly.

Never use alcohol or other solvents to

clean any parts of the loudspeaker!

Loudspeaker protection

The loudspeaker is equipped with a

thermal protection system which

prevents overheating. If an error

occurs – or the speaker units

become overheated – the system

automatically switches the

loudspeaker to standby, and the

indicator light turns yellow.

To restore the situation:

> Disconnect the loudspeaker from

the mains.

> Allow the system time to reset

(approximately 3–5 minutes).

> Reconnect the loudspeaker to

the mains again.

Should the problem persist, contact

your Bang & Olufsen retailer.

Indicator light: In daily use the

indicator light shines either red

(standby) or greAen (playing). If an

error occurs – or the speaker units

become overheated – the light

switches to yellow.

Caution: Do not touch the BeoLab 3

top speaker membrane!

1 2 3 4 5 6 7 8 ... 11 12

Comments to this Manuals

No comments

Bang & Olufsen BeoLab 10 Specifications Page 3

Comments to this Manuals

Related products and manuals for Soundbar speakers Bang & Olufsen BeoLab 10