Bang & Olufsen BeoLab 10 Specifications download pdf (Page 4)

Setting up BeoLab 3

We recommend that you follow

this procedure:

– Disconnect your system from the

mains.

– Place the loudspeaker according

to the guidelines on these two

pages. For information on how

to fasten the loudspeaker to

the optional accessories, refer to

the Guide enclosed with the

accessory.

– Connect the loudspeaker and set

the SETUP switch as explained in

‘Cable connections’ (pp. 6–7).

– Set the POSITION switch to the

correct setting on each

loudspeaker. This is explained in

‘Adapt BeoLab 3 to your room’ (pp.

8–10).

– Connect the entire system to the

mains again.

Cautions

– Make sure that the loudspeaker

is placed and connected in

accordance with the instructions

in this Guide.

– Do not attempt to open the

loudspeaker. Leave such

operations to qualiﬁ ed service

personnel!

– The loudspeaker is designed for

indoor use in dry, domestic

environments only, and for use

within a temperature range of

10–40º C (50–105º F).

– Do not in any way block the free

movement of the speaker units,

and do not apply any force to

them, as this may result in

permanent damage!

– Do not lift the loudspeaker by

gripping the top part (the

acoustic lens).

– Do not place any items on top of

the loudspeaker.

– Do not place the loudspeaker

enclosed in, for example, a small

bookcase.

– Leave a minimum of 20 cm (8")

free space at the sides, and never

place anything directly in front of

the loudspeaker.

– Always place the loudspeaker in

an upright position.

4

The loudspeaker must be placed on either the black rubber base, a floor

stand, a table stand, or a wall bracket.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments