Bang-olufsen BeoVision 10 User Guide User Manual download pdf (Page 5)

5

MENU LANGUAGE… You can select the

language for on-screen menus. The text

on the screen changes as you move from

language to language.

STAND ADJUSTMENT … Set the maximum

angle for turn for the television. Use and

to turn the television and limit the

movement of the stand.

STAND POSITIONS … Set your preferred

preset positions for the television. For

further information about the STAND

POSITIONS menu, see page7.

TUNER SETUP … Disable the television tuner

or DVB tuner, if you like, see page8.

STANDBY SETTINGS … The television can be

set to switch itself to standby after some

time with no operation. You can also switch

power saving on or off, see page31

.

CONNECTIONS … Select the type of

equipment you have connected to each

socket, the sockets used, the product

name, and the source name. For further

information about the CONNECTIONS

menu, see page9.

CHECK AERIAL CONNECTION… This

prompt only appears, if the television

tuner is enabled.

AUTO TUNING … When you have registered

your connected equipment, a menu for

channel tuning automatically appears on

the screen. Press the centre button to

start auto tuning. The television nds all

available channels. For further information

about tuning TV channels, see page19.

SPEAKER TYPE… In this menu, you select

which speakers are connected to the

television, if any. See page20 for further

information.

SPEAKER DISTANCE… In this menu, you

select the distance in metres to each of

the speakers in your setup (only

BeoVision10–40/46).

SPEAKER LEVEL… In this menu, you can

adjust the volume level of each speaker in

your setup (only BeoVision10–40/46).

ADJUSTMENT… In this menu, you can

adjust bass, volume, treble, etc.

DVB SETUP… If the DVB-HD tuner is

enabled, the DVB SETUP menu appears,

see the separate DVB-HD guide for further

information.

For information about where to connect

extra equipment, see the chapter about

connection panels in Getting Started.

First-time setup

The setup procedure is activated

when the television is connected

to the mains and switched on for

the rst time. You are led

through an automatic series of

on-screen menus in which you

must register the extra equipment

you have connected, such as

loud speakers.

If you change your setup at a later

date,

you can access the same

menus and update your settings.

Remember that you need to set

the speaker types and the

distances in the SOUND menu.

The sequence of menus in rst-time setup

1 2 3 4 5 6 7 8 9 10 ... 45 46

Comments to this Manuals

No comments