Bang-olufsen BeoVision 10 User Guide User Manual download pdf (Page 28)

28

You can select the speaker

combination that suits the source

you are using, provided that the

various speaker modes are available

in your television.

NOTE! If you have no external speakers

connected or only a subwoofer, you will

only be able to choose SPEAKER 1.

Daily use of speaker combinations

– BeoVision 10-32

You can choose between three speaker

modes depending on which source you

are using and which speakers you have

connected to your television.

> Press LIST and use the navigation button

up or down to bring up SPEAKER in the

Beo4 display (Beo6: Press to bring up

the Scene display on Beo6, then press

Speaker to bring up the Speaker display).

> Press 1–3 to select the speaker

combination you want. (Beo6: Press

Optimise or Mode 1 – 3). The selected

speakers cut in automatically.

> Press and hold BACK to remove SPEAKER

from the Beo4 display and return to the

source you were using. (Beo6: Press to

remove the Speaker display).

Adjust speaker balance with

Beo4

You can temporarily adjust the balance

between the speakers …

> Press LIST and use the navigation button

up or down to bring up SPEAKER in the

Beo4 display and press the centre button.

> Now use and to adjust the speaker

balance left and right.

> Press BACK to remove SPEAKER from the

Beo4 display and return to the source you

were using.

SPEAKER 1

SPEAKER 1

SPEAKER 2

SPEAKER 3

You can preset two default speaker

combinations which suit the source you are

using, see page 27.

Select speakers for movie sound

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 45 46

Comments to this Manuals

No comments