Bang-olufsen BeoVision 10 User Guide User Manual download pdf (Page 12)

12

Register additional video equipment

If you connect additional video

equipment to your television,

you must register the equipment

in the CONNECTIONS menu.

When the television is rst set

up, some of the equipment

connected at that particular

moment is detected by the

television. The CONNECTIONS

menu appears automatically on

the screen during rst-time

setup for you to register

connected equipment, if it is not

detected automatically by the

television. If you connect

equipment at a later date, you

must register this equipment in

the CONNECTIONS menu.

Registering the equipment connected

to the television enables you to operate

it with your remote control.

> Bring up the TV SETUP menu and

highlight OPTIONS.

> Press the centre button to bring up the

OPTIONS menu. CONNECTIONS is

highlighted already.

> Press the centre button to bring up the

CONNECTIONS menu.

> Use the navigation button up or down to

step between the different socket groups:

AV1, AV2, AV3, AV5, AV6, HDMI

EXPANDER and HDMI MATRIX, when

available.

> Press the centre button to be able to

register a connected product type to the

highlighted socket group.

> Use the navigation button up and down

to move between the sockets in the

group.

> Use the navigation button left or right to

register what you have connected to the

highlighted socket.

> Press the centre button to be able to

select the product from an on-screen list. .

> Use the navigation button left or right to

see lists for other types of products.

> Use the navigation button up or down or

a number button to highlight the name of

the product and press the centre button

to register it.

> Press the green button to be able to

name the source. The naming menu is

now activated.

> Use the navigation button up and down

to nd the individual characters in the

name.

> Press the centre button to accept the

name.

> Names are shown in the television on-

screen display when the source is selected.

> Press the centre button to bring up the

AUTO STANDBY menu.

> Use the navigation button left or right to

see the list of standby options for when

the connected equipment should switch

to standby.

> Press the centre button to select a

standby option.

> When you have completed your settings

for a single socket group, press the

centre button to return to the

CONNECTIONS menu.

> Repeat the procedure for each socket

group.

At rst-time setup only, when you have

registered all connected equipment, press

the green button to store the setup.

What is connected?

CONNECTIONS

AV1 NONE

AV 2 NONE

AV 3 NONE

AV4 NONE

AV5 NONE

AV6 NONE

HDMI EXPANDER NO

HDMI MATRIX NO

LINK TUNING

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 45 46

Comments to this Manuals

No comments