Bang-olufsen BeoVision 10 User Guide User Manual download pdf (Page 42)

42

The BeoLink system makes it

possible to distribute picture

and/or sound to other rooms

throughout the house.

For example, you can connect

your television in the living room

to another video system or set of

speakers in another room,

thereby making it possible to

‘move’ the picture or sound to

other rooms.

If you have a BeoLink distribution

system installed, you can either

use your television in the main

room, such as a living room, or

in a link room, such as a study or

bedroom.

Under certain circumstances, it

may be necessary to enter

modulator settings.

Distribute sound and picture with BeoLink

Link connections

The main room television must be

connected to the link room system with

a Master Link cable:

> Connect the Master Link cable to the

socket marked MASTER LINK on the

television.

> If you want to distribute video signals as

well, connect an ordinary aerial cable to

the socket marked RF OUT on the

television. Then run the aerial cable to the

RF Link Amplier and the Master Link

cable to the link room. Follow the

instructions enclosed with the link room

equipment.

If an audio system is already connected to

the Master Link socket and you wish to

connect more equipment, the Master Link

cable must be split in two and joined with

the cable from the link room using a special

junction box. Contact your Bang & Olufsen

retailer for assistance.

Digital signals (HDMI) cannot be distributed

from a main room television to the link room

system.

If you set the POWER SAVING to ON, you

cannot activate the television or its sources

from your link room. Also Master Link must

not be connected.

MASTER

LINK

RF Link

Amplifier

RF OUTTV

To the MASTER LINK socket on the link

room system

Video signal distribution to link rooms

1 2 ... 37 38 39 40 41 42 43 44 45 46

Comments to this Manuals

No comments