BeoVision Avant BeoVisionAvant–55BeoVisionAvant–75BeoVisionAvant–85
10>> Understanding the guideSelect source… You can bring up a source by pressing the TV or MUSIC button and select a source in the remote contr
11Set up your television Set the maximum angle the TV will turn on the motorised floor stand or wall bracket. Remember to leave enough space around the
12>> Set up your televisionLocate the connection panel and other important items: 1 Holes for mounting of a wall bracket. 2 Holes for mounting
13Maintenance Regular maintenance, such as cleaning, is the responsibility of the user. Screen Use a mild window cleaning fluid and lightly clean the s
14Connections The connection panel on your television allows you to connect signal input cables as well as a variety of extra equipment, such as a DVD
15>> Connections Equipment you connect permanently to the main connection panel must be registered in the SOURCE LIST menu by pressing the green
16>> Connections Ethernet For connection to the Internet. For software updates, access to WebMedia, NetRadio and PUC downloads. Make sure the c
17>> Connections Connect digital sources Connect up to six external HDMI sources, such as a set-top box, computer or game console. All equipment
18>> Connections Before you connect a computer, you must disconnect the television, the computer and all connected equipment from the mains supp
19To operate non-Bang& Olufsen products with a BeoRemoteOne or the BeoRemote App, attach a Bang& Olufsen IR-transmitter on your non-Bang&a
2Dear CustomerThis guide contains additional information about the daily use of your Bang& Olufsen product and connected equipment, and describes
20>> Connections Activate the CA modules In the CA MODULES menu, you can activate or deactivate the CA modules for terrestrial, cable or satelli
21>> Connections Connect speakers to the television You can connect up to ten wired speakers and subwoofers to the television using Power Link c
22Set positions for the television to turn to If your television is equipped with the optional motorised floor stand or wall bracket, you can turn it u
23Set up additional equipment If you connect additional video equipment to your television, you can set up the equipment in the SOURCE LIST menu when
24>> Set up additional equipmentYou can search with latin characters and numbers. For equipment names with non-latin characters you can search f
25>> Set up additional equipmentYou can connect two USB mass storage devices to your television and browse the contents of supported formats. A
26Watch television Watch analogue and digital terrestrial, cable and satellite channels depending on your tuner options. Make channel groups, and turn
27>> Watch television Turn the television mounted on a floor stand… Press to bring up STAND in the BeoRemoteOne display Turn the television by
28Programme information You can bring up information on the current programme, or bring up a Programme Guide. You can also change audio and subtitle l
29You can bring up a Programme Guide that contains information about current and coming programmes on channels and stations for up to two weeks. You c
3How to use your remote control, 6See how to use the remote control. You can also use BeoRemote App to operate your television. Understanding the guid
30Use channels, groups and lists You can make, edit and use groups to make it easier to find your favourite television channels and radio stations. If
31>> Use channels, groups and lists You can remove any tuned channel or station you do not want in your channel list or restore selected channel
32>> Use channels, groups and lists Watch Pay Per View channels You can watch Pay Per View channels if supported by your service provider, howev
33Pause and play back a programme With a connected USB HDD or SSD set up for recording you can pause, resume and repeat a digital programme in progres
34>> Pause and play back a programme Step between programmes… Go to the previous or next programme in the timeshift buer. Press to go to the p
35Record a programme A connected USB HDD or SSD set up for recording allows you to make Timer recordings and execute two Timers simultaneously. Your s
36>> Record a programme Record using the Programme Guide…Press to bring up the Programme Guide and select the programme you want to recordPress
37>> Record a programme Check the Timers already set You can check the Timers that are waiting to be executed, as well as edit or delete them. Y
38Play a recording With a connected USB HDD or SSD set up for recording you can play and browse through recordings of digital programmes. Switch on a
39>> Play a recording Pause or stop playback… Pause or stop playback of a recording. Press to pause playbackPlay back slowly, press again to ch
4Daily use of sound modes and speaker groups, 47 Switch between dierent sound modes, such as GAME mode, to optimise sound from your surround sound sy
40Edit recordings A connected USB HDD or SSD set up for recording allows you to edit the hard disk content to your liking. For example, you can change
41Re-tune channels You can make your television find your TV channels and radio stations for you. Channels and stations are updated automatically, but
42Change channel input by enabling or disabling the cable, terrestrial, satellite and analogue inputs, the active antenna and the line length compensa
43Loudspeaker setup – surround sound Add BeoLab speakers and BeoLab subwoofers to your television wired or wirelessly and you can have a surround soun
44>> Loudspeaker setup – surround sound Reset sound settings If you for some reason need to reset sound settings to default values, for example,
45>> Loudspeaker setup – surround sound Adjust distances and levels automatically… Place the connected microphone in the primary listening posi
46>> Loudspeaker setup – surround sound Set up sound modes The television has several sound modes optimised for dierent types of programmes and
47Daily use of sound modes and speaker groups You can extend your television into a surround sound system by adding BeoLab loudspeakers and subwoofers
48Adjust sound and picture settingsSound and picture settings are preset from the factory to neutral values which suit most types of programmes. Howev
49>> Adjust sound and picture settings You can activate dierent picture modes to use for dierent types of programmes. If you, for example, con
5>> Contents – Click a headline to move to that section Software and service update, 71 Update software and find information about modules, for y
50In the SOURCE LIST menu, you can, for each source, press the red button and set up a picture format to be used each time you activate this source. Y
51You can save up to three snapshots which can be activated by three dedicated remote control buttons. The television must be switched on and a source
52You can select if the television should activate 3D mode automatically, manually or by prompt, when it detects 3D signalling the first time after sou
53Watch 3D television To watch films or other programmes suited for 3D, you must activate the 3D function and put on the activated 3D glasses that are
54>> Watch 3D television Select the 3D mode that matches the signal sent out by the programme provider. SIDE BY SIDE 3D Converts side-by-side 3D
55See two sources at the same time Your BeoRemoteOne gives you access to a DUAL PICTURE function for viewing two television channels or a television
56Teletext You can operate teletext through the menu bar at the top of the teletext page or the P+, P- and number buttons on your remote control. You
57You may wish to refer to your teletext MEMO pages quickly, for example, if you are leaving for work and wish to check trac information on a teletex
58Some functions are available directly via BeoRemoteOne when you switch on the equipment. Additional functions are available through a menu overlay
59NetRadio With NetRadio you have access to radio stations worldwide. NetRadio stations are downloaded via BeoPortal, consequently, the television mus
6Your television can be operated with BeoRemoteOne. Select colour specific functions Adjust volume. To mute, press the middle of the button The displa
60>> NetRadio Favourites list You can store up to 99 stations in your favourites list. Add to your favourites list… When browsing through stati
61WebMediaWith the built-in WebMedia feature for SmartTV you can search and find movies, YouTube videos, photos and other web related content. WebMedi
62>> WebMediaWhile WEBMEDIA is selected as source, press MENU to bring up the WebMedia menu overlay. The remote control buttons are shown to the
63Spotify, Deezer and YouTube You can access Spotify or Deezer, if you have a required subscription, and search through and stream music for every occ
64HomeMediaDuring playback of your music, you can see the NOW PLAYING menu with cover and information about artist, title and track, if available. Whe
65>> HomeMedia Browse photos… Connect a storage device with your photos Bring up sources in the BeoRemoteOne display and select the source ded
66>> HomeMedia You can choose to play your music or video files or browse your photos in a random order or repeat playback, or browse when you ha
67Sleep Timers Your television has a built-in Sleep Timer which means that you can make it switch o after a predefined number of minutes. You can make
68Power settings If you want to make your television start up faster, you can set a Quick-Start Timer for one or two specified time periods. This will
69Access control The ACCESS CONTROL menu allows you to activate a parental lock to be able to lock specific channels. You can also set a maturity ratin
7>> How to use your remote control BeoRemote App allows you to operate your television with a smartphone or iOS tablet and is especially useful
70The pin code system The pin code system is intended to make normal use of your television impossible for someone who does not know the pin code. You
71We recommend that you enable automatic software update on your television to ensure that your television always has the latest features and function
72Digital Text and HbbTVYour television supports Digital Text for MHEG operation, which is required by some countries and CA modules, among other to a
73Network settings You can set up your television to a network either with a wired or wireless connection. For the most reliable network connection, B
74>> Network settings Make a wireless connection If your router has the WPS feature (wireless protected setup), you can make a wireless connecti
75>> Network settings You can see information on your network connection in the NETWORK INFO menu. Note: A previously well-functioning setup may
76Distribute sound with Network Link Link connections With Network Link you can distribute sound, but not video signals, to other rooms throughout the
77You can integrate external equipment with your television to listen to music from an audio system or another television. You can listen to audio and
78Connect and operate an audio system If you connect a compatible Bang & Olufsen audio system to the television, you obtain the benefits of an inte
79>> Connect and operate an audio systemUse an audio/video system The television and an audio system is set up in one room with all speakers con
8To activate picture modes directly … Press to bring up PICTURE in the BeoRemoteOne display Press to select a picture mode Step between modesPress to
80Two televisions – Network Link connection Products with Network Link can borrow source sound from each other. If you connect a compatible Bang &
81>> Two televisions – Network Link connection A television with Network Link and a television with Master Link Network link television: – LINK
82If you have two Bang & Olufsen televisions, and commands from your remote control can be received by both televisions, you must change between t
83HDMI Matrix The HDMI Matrix itself is a physical product that can be connected allowing you to connect up to 32 external sources to up to 32 televis
9Navigate in menus and select settings using your remote control. Pressing MENU brings up the main menu, including a menu overlay for the active sourc
Comments to this Manuals