Bang-olufsen BeoVision 3-28 - User Guide User Manual download pdf (Page 45)

45

To copy a recording from a Camcorder…

> Connect your Camcorder and start playback on

the Camcorder.

> Press RECORD twice to start recording.

Choosing another source or switching off the

television during recording from a Camcorder

disrupts recording. It is not possible to view TV

programs during recording.

Close-up socket panel

The television’s close-up socket panel

is located on the front of the

television, below the screen.

You can connect headphones and

listen to a TV programme, or you can

connect a Camcorder and watch your

home movies on the television. If you

have connected a BeoCord V 8000

video tape recorder, you can copy

Camcorder recordings onto a

videotape.

The close-up socket panel Copy from a Camcorder

If you have connected a video tape recorder,

such as a BeoCord V 8000, to your television,

and you connect your Camcorder to the

close-up socket panel, you can copy

Camcorder recordings onto a videotape.

PHONES

LRVIDEO

Video R – L

These sockets are for the connection of a

Camcorder:

VIDEO: For the video signal.

R – L: For audio connection (left and right

sound channel respectively).

PHONES

You can connect stereo headphones to the socket

marked PHONES. The television speakers are

muted when headphones are connected and

activated again when the headphones are

disconnected.

Watch Camcorder on your television

To watch your Camcorder recordings, connect

the Camcorder and switch the television on.

When you start playback on your Camcorder,

the television automatically registers the

signal and you can see the pictures from the

Camcorder on the screen.

To watch Camcorder recordings…

> Connect your Camcorder and start playback on

the Camcorder.

> Press TV to switch on the television. The

Camcorder signal appears automatically.

If the signal from the Camcorder is switched

off…

> Press LIST repeatedly to display CAMCORD on

Beo4 and press GO.

In order to display CAMCORD on Beo4, you must

first add it to the Beo4 list of functions. For further

information, refer to the chapter ‘Customise Beo4’

on the CD-rom.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51 52

Comments to this Manuals

No comments