Bang & Olufsen BeoLab 5 Specifications download pdf (Page 10)

>> Connect cables

Connection to non-Bang & Olufsen

systems

The loudspeaker may be connected to most

non-Bang & Olufsen audio or video systems

equipped with a non-regulated LINE level

output (volume levels are adjusted in the

built-in loudspeaker amplifiers, not in the

audio or video system).

The loudspeaker may also be connected to

most systems with a digital output socket

(SPDIF).

When connecting to non-Bang & Olufsen systems,

remember to change the ‘Option’ setting to either

1 or 4, as explained in ‘Adapt BeoLab 5 to your

system’ (p. 11).

LINE

'Sync.'

DIGITALDIGITAL

OUT

LINE connections

Use ordinary phono cables to connect each

loudspeaker directly to your system.

If the LINE output level exceeds 2 V RMS, you must

set each loudspeaker to accommodate a higher

input level (> 2 V RMS ≤ 4 V RMS), as explained in

Adapt BeoLab 5 to your system (p. 11).

‘Syncr.’ connection

Connection between the two loudspeakers. The

connection ensures that both loudspeakers always

play at the same volume level.

Use a Bang & Olufsen approved cable with a

mini-jack plug in each end to connect the two

loudspeakers in a setup.

DIGITAL connections

If your system has a digital output socket, we

recommend that you connect the loudspeakers to

this socket as well. This ensures optimal sound

quality when playing digital sources.

Use Bang & Olufsen approved phono cables to

connect the loudspeakers to your system.

When using digital connections, remember to set

the switch marked RIGHT–LEFT to the correct

position on each loudspeaker!

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Bang & Olufsen BeoLab 5 Specifications Page 10

Comments to this Manuals

Related products and manuals for Soundbar speakers Bang & Olufsen BeoLab 5