Bang & Olufsen BeoVision?10-32 User Manual download pdf (Page 26)

26

>> Set the television to switch itself on or off

DTV Play Timer

You can program a Play Timer on a

connected Bang & Olufsen audio or

video product. If the Play Timer uses the

DVB Module in the television as source,

you must tell it which MODE it should

start in. That is should radio or television

switch on. Also you must tell it which

GROUP, that is which of the station or

channel groups should be used when

the Play Timer is executed.

To make settings for a DTV Play Timer …

> Bring up the TV SETUP menu and highlight 

OPTIONS. 

> Press the centre button to bring up the 

OPTIONS menu and highlight DTV PLAY 

TIMER.

> Press the centre button to bring up the 

DTV PLAY TIMER menu, and use the 

navigation button up or down to move 

between MODE and GROUP.

> Use the navigation button left or right to 

select the setting you want. 

> Press the centre button to store the 

setting.

> Press BACK to back up through previous 

menus or press and hold BACK to exit all 

menus. 

Note! If the TV tuner is disabled and the

DVB module is activated by pressing TV on

the remote control, the name of the menu is

TV PLAY TIMER.

Also remember to set the PLAY TIMER menu

to ON, if the television or its speakers are to

be activated by the Play Timer.

Standby Settings

The television can be set to switch itself

to standby after some time with no

operation. The factory setting is 4 hours.

This function only applies in video mode

not in audio mode.

To make standby settings …

> Bring up the TV SETUP menu and highlight 

OPTIONS. 

> Press the centre button to bring up the 

OPTIONS menu and highlight STANDBY 

SETTINGS. Press the centre button to 

bring up the STANDBY SETTINGS menu 

and use the navigation button up or down 

to move between AUTO STANDBY and 

POWER SAVING.

> Use the navigation button left or right to 

select the setting you want.

> Press the centre button to store the 

setting.

> Press BACK to back up through previous 

menus or press and hold BACK to exit all 

menus. 

When AUTO STANDBY is activated, a

message appears on your television screen if

the television has not been operated during

the time set in the menu. The television then

switches to standby if you do not operate it.

If you set the POWER SAVING to ON, you

cannot activate the television or its sources

from your link room, while the main room

television is in standby. Furthermore, when

POWER SAVING is set to ON you cannot

activate external PLAY TIMERs.

DTV PLAY TIMER menu

STANDBY SETTINGS menu

DTV PLAY TIMER

MODE TV

GROUP SPORT

STANDBY SETTINGS

AUTO STANDBY 4 HOURS

POWER SAVING OFF

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 40 41

Comments to this Manuals

No comments