Bang & Olufsen BeoCom Beocom 6000 User Manual download pdf (Page 6)

Get started

Charge the handset battery

If the handset requires charging, this occurs automatically when

the handset is placed in the charger. For safety reasons, the

battery is not charged prior to shipping. We recommend that you

charge the handset for at least one hour before proceeding

further with ﬁrst-time registration of the handset.

About charging …

– The charger must be connected to the power outlet.

– It takes four hours to fully charge the battery.

– The maximum talk-time per charge is approximately 15 hours.

– Standby time per charge is approximately 200 hours.

Battery status

The battery indicator in the display shows the charge level of the

handset battery. If the batteries require charging, you are alerted

by a message in the display and a sound signal.

To display the battery status …

Press while the handset is in standby

Turn the wheel until Battery status is shown and

press OK. The current charge level appears in

the display

When getting started, follow this

procedure:

1 Connect the charger to the

power outlet as described in the

charger’s Guide

2 Charge the handset battery

3 Connect the BeoLine base as

described in the BeoLine Guide

4 Register the handset to the base.

25%

50%

75%

The handset controls the battery

charging, so you can always place

the handset in the charger after

use, even if the battery does not

need recharging. Leaving the

handset in the charger does not

reduce the lifetime of the battery.

Battery status

=========

======

===

1 2 3 4 5 6 7 8 9 10 11 ... 55 56

Comments to this Manuals

No comments

Bang & Olufsen BeoCom Beocom 6000 User Manual Page 6

Comments to this Manuals

Related products and manuals for Telephones Bang & Olufsen BeoCom Beocom 6000