Bang-olufsen BeoLab 11 - User Guide User Manual download pdf (Page 4)

Set up the subwoofer

We recommend that you follow

this procedure:

– Disconnect your system from the

mains supply.

– Place the subwoofer according to

the guidelines in ‘Adapt the

subwoofer to your setup’ (p.8).

For information on how to fasten

the subwoofer to the optional

accessories, refer to the Guide

enclosed with the accessory.

– Set the switches to the correct

settings. This is explained in

‘Adapt the subwoofer to your

setup’ (pp.8–9).

– Connect your speaker system as

described in ‘Connect your

speaker system’ (pp.6–7).

– Connect the entire system to the

mains again.

Cautions

– Make sure that the subwoofer is

placed and connected in

accordance with the instructions

in this Guide. To prevent injury,

use Bang & Olufsen approved

stands and wall brackets only!

– The subwoofer can only be

switched off completely by

disconnecting it from the wall

socket.

– Do not obstruct the gap between

the subwoofer units.

– The subwoofer is designed for

indoor use in dry, domestic

environments only, and for use

within a temperature range of

10–40º C (50–105º F).

– Remember that all speakers in a

setup must be connected to a

mains outlet, and that they are

designed to be connected to the

mains at all times, as this allows

them to switch on automatically.

– Do not attempt to open the

subwoofer. Leave such operations

to qualied service personnel!

4

Location of the product

identiﬁcation label.

Leave it to qualiﬁed personnel to

remove the shell as the subwoofer

may be damaged in the process.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments